Amazon DynamoDB OCF Connector (Public Preview): Install and Configure¶
Alation Cloud Service Applies to Alation Cloud Service instances of Alation
Customer Managed Applies to customer-managed instances of Alation
Network Connectivity¶
Open outbound TCP port 8000 to the DynamoDB server.
Service Account¶
You can choose from the given auth scheme and authenticate with the Service. For example: If you choose to authenticate using IAMRole, you can just pass your AccessKey, SecretKey, and ARN.
Permissions for Metadata Extraction¶
Use the predefined roles for Amazon DynamoDB:
AmazonDynamoDBReadOnlyAccess: Grants read-only access to DynamoDB resources through the AWS Management Console.
AmazonDynamoDBFullAccess: Grants full access to DynamoDB resources through the AWS Management Console.
Refer to the table below for minimum permissions required for IAM Role:
IAM Role
Description
dynamodb:ListTables
Required for getting a list of your DynamoDB tables. Used during metadata retrieval to dynamically determine the list of your tables. Note that this action does not support resource-level permissions and requires you to choose All resources (hence the * for “Resource”). In other words, the action
dynamodb:ListTablesneeds a*Resource, and the other actions can be given permission to all the tablesarn:aws:dynamodb:us-east-1:987654321098:table/*or to a list of tables:"Resource": [ "arn:aws:dynamodb:us-east-1:987654321098:table/Customers", "arn:aws:dynamodb:us-east-1:987654321098:table/Orders" ]dynamodb:DescribeTable
Required for getting metadata about the selected table. Used during table metadata retrieval to dynamically determine the list of the columns. This action supports resource-level permissions, so you can specify the tables you want to get the metadata from. For example, for the table Customers and Orders in the region Northern Virginia us-east-1, for account 987654321098:
{ "Effect": "Allow", "Action": [ "dynamodb:DescribeTable" ], "Resource": [ "arn:aws:dynamodb:us-east-1:987654321098:table/Customers", "arn:aws:dynamodb:us-east-1:987654321098:table/Orders" ] }To give permissions to all the tables in the region you specified in the connection property AWSRegion, use an
*instead of the table name:"Resource": "arn:aws:dynamodb:us-east-1:987654321098:table/*"
Permissions for Sampling and Profiling¶
Use the predefined roles for Amazon DynamoDB:
AmazonDynamoDBReadOnlyAccess: Grants read-only access to DynamoDB resources through the AWS Management Console.
AmazonDynamoDBFullAccess: Grants full access to DynamoDB resources through the AWS Management Console.
Refer to the table below for minimum permissions required for IAM Role:
IAM Role
Description
dynamodb:Scan
Required for getting one or more items by accessing every item in the table. Used for most of the SELECT queries, for example,
SELECT * FROM [Customers].This action supports resource-level permissions, so you can specify the tables you want to get data from, similar to
dynamodb:DescribeTable.dynamodb:PartiQLSelect
Required for getting specific items from a table when using SELECT queries and filtering by the primary key column, for example,
SELECT * FROM [Customers] WHERE id=1234.This action supports resource-level permissions, so you can specify the tables you want to get data from, similar to
dynamodb:DescribeTable.
Authentication¶
Basic Authentication¶
You’ll need the following credentials for basic authentication:
Username of the service account
Password of the service account
AWS Authentication¶
Select one of the following values in the Auth Scheme on the General Settings page to enable AWS authentication:
AWS Root Keys (Default)
AWS IAM Roles
AWS EC2 Roles
AWS MFA
AWS Cognito SRP
AWS Cognito Basic
SSL Authentication¶
Note
The SSL authentication is not supported in this release. However, you can specify the SSL certificate content for an SSL handshake if the cluster on DynamoDB is using SSL.
Select Use SSL in the Auth Scheme on the General Settings page to enable this.
You’ll need the following credentials and resources for authentication:
Username of the service account
Password of the service account
The SSL certificate file
SSO Authentication¶
Note
The SSO authentication is not supported in this release.
Select the Identity Provider (IdP) OKTA, ADFS, or PingFederate in SSO > Auth Scheme on the General Settings page to enable this.
You’ll need the following credentials and resources for authentication:
Username of the IdP
Password of the IdP
SSO Login URL
SSO Exchange URL
JDBC URI¶
Make use of the Cdata exposed connection property to build the URI or you can use the Connection properties displayed on General Settings directly.
Use the following format to build the JDBC URI:
Format:¶
amazondynamodb://AWSAccessKey=xxx;AWSSecretKey=xxx;Domain=amazonaws.com;AWS Region=OREGON;
Install the Connector¶
Alation On-Premise¶
Important
Installation of OCF connectors requires Alation Connector Manager to be installed as a prerequisite.
To install an OCF connector:
If this has not been done on your instance, install the Alation Connector Manager: Install Alation Connector Manager.
Ensure that the OCF connector Zip file is available on your local machine.
Install the connector on the Connectors Dashboard page using the steps in Manage Connectors.
Alation Cloud Service¶
Note
On Alation Cloud Service instances, Alation Connector Manager is available by default.
Depending on your network configuration, you may need to use Alation Agent to connect to databases.
Connection via Alation Agent¶
Ensure that Alation Agent is enabled on your Alation instance. If necessary, create a Support ticket with Alation for an Alation representative to enable the Alation Agent feature on your instance and to receive the Alation Agent installer.
Install the connector on the Connectors Dashboard page using the steps in Manage Connectors.
Connection Without Agent¶
To install an OCF connector:
Ensure that the OCF connector Zip file is available on your local machine.
Install the connector on the Connectors Dashboard page using the steps in Manage Connectors.
Create and Configure a New Data Source¶
In Alation, add a new data source:
Log in to Alation as a Server Admin.
Expand the Apps menu on the right of the main toolbar and select Sources.
On the Sources page, click +Add on the top right of the page and in the list that opens, click Data Source. This will open the Add a Data Source wizard.
On the first screen of the wizard, specify a name for your data source, assign additional Data Source Admins, if necessary, and click the Continue Setup button on the bottom. The Add a Data Source screen will open.
On the Add a Data Source screen, the only field you should populate is Database Type. From the Database Type dropdown, select the connector name. After that you will be navigated to the Settings page of your new data source.
Note
Agent-based connectors will have the Agent name appended to the connector name.
The name of this connector is Alation OCF Connector for DynamoDB.
Configuration¶
Access¶
On the Access tab, set the data source visibility using these options:
Public Data Source—The data source will be visible to all users of the catalog.
Private Data Source—The data source will be visible to the users allowed access to the data source by Data Source Admins.
You can add new Data Source Admin users in the Data Source Admins section.
General Settings¶
Note
The automatic lineage is not supported in this release.
Specify Application Settings if applicable. Click Save to save the changes after providing the information.
Parameter |
Description |
|---|---|
BI Connection Info |
This parameter is used to generate lineage between the current data source and another source in the catalog, for example a BI source that retrieves data from the underlying database. The parameter accepts host and port information of the corresponding BI data source connection. Use the following format: You can provide multiple values as a comma-separated list:
Find more details in BI Connection Info |
Disable Automatic Lineage Generation |
Select this checkbox to disable automatic lineage generation from QLI, MDE, and Compose queries. By default, automatic lineage generation is enabled. |
Connector Settings¶
Populate the data source connection information and Save the values.
Data Source Connection¶
Parameter
Description
JDBC URI
Specify the JDBC URI in the required format.
Connection¶
Parameter
Description
Use Lake Formation
Select this to retrieve temporary credentials that enforces access policies against the user based on the configured IAM role. The service can be used when authenticating through OKTA, ADFS, AzureAD, PingFederate, while providing a SAML assertion.
AWS Authentication¶
Parameter
Description
Auth Scheme
Specify an authentication scheme that DynamoDB uses to authenticate the connection.
Available Values:
Auto: Set this to have the provider attempt to automatically resolve the proper authentication scheme to use based on the other connection properties specified.
TemporaryCredentials: Set this to leverage temporary security credentials alongside a session token to connect.
AwsRootKeys: (Default) Set this to use the root user access key and secret. Useful for quickly testing, but production use cases are encouraged to use something with narrowed permissions.
AwsIAMRoles: Set to use IAM Roles for the connection.
AwsEC2Roles: Set this to automatically use IAM Roles assigned to the EC2 machine the CData Alation OCF Connector for Amazon DynamoDB is currently running on.
AwsMFA: Set to use multi factor authentication.
Okta: Set to use a single sign on (SSO) connection with OKTA as the identity provider.
ADFS: Set to use a single sign on (SSO) connection with ADFS as the identity provider.
PingFederate: Set to use a single sign on (SSO) connection with PingFederate as the identity provider.
AwsCredentialsFile: Set to use a credential file for authentication.
AwsCognitoSrp: Set to use Cognito based authentication. This is recommended over AwsCognitoBasic because this option does NOT send the password to the server for authentication, instead it uses the SRP protocol.
AwsCognitoBasic: Set to use Cognito based authentication.
Domain
Specify your AWS domain name. You can optionally choose to associate the domain name with AWS.
Default: amazonaws.com
AWS Access Key
Specify your AWS account access key. This value is accessible from your AWS security credentials page.
AWS Secret Key
Specify your AWS account secret key. This value is accessible from your AWS security credentials page.
AWS Role ARN
Specify the Amazon Resource Name of the role to use when authenticating for a role based authentication.
Requires AWS Access Key and AWS Secret Key of an IAM user.
AWS Region
Specify the hosting region for your Amazon Web Services.
Default: NORTHERNVIRGINIA
Available Values:
OHIO, NORTHERNVIRGINIA, NORTHERNCALIFORNIA, OREGON, CAPETOWN, HONGKONG, JAKARTA, MUMBAI, OSAKA, SEOUL, SINGAPORE, SYDNEY, TOKYO, CENTRAL, BEIJING, NINGXIA, FRANKFURT, IRELAND, LONDON, MILAN, PARIS, STOCKHOLM, ZURICH, BAHRAIN, UAE, SAOPAULO, GOVCLOUDEAST, GOVCLOUDWEST
AWS Credentials File
Select the path to the AWS Credentials File to be used for authentication.
Note
AWS Credentials File is not supported in this release.
For more information, see Configure Files.
AWS Credentials File Profile
Specify the name of the profile to be used from the supplied AWS Credentials File.
Note
AWS Credentials File is not supported in this release.
AWS Session Token
Specify your AWS session token.
AWS External ID
Specify a unique identifier that is required when you assume a role in another account.
MFA Serial Number
Specify the MFA Serial Number.
You can find the device for an IAM user on the AWS Management Console and view the user’s security credentials.
For virtual devices, this is Amazon Resource Name, example: arn:aws:iam::123456789012:mfa/user
MFA Token
Specify the temporary token available on your MFA device.
This is used with the MFA Serial Number to retrieve temporary credentials for login. The temporary credentials available from AWS only lasts up to one hour by default.
Temporary Token Duration
Specify the time duration (in seconds) for a temporary token to last.
Default: 3600
For MFA connection, a new MFA Token must be specified in the connection to retrieve a new temporary token.
For Role based authentication, the minimum duration is 900 seconds (15 minutes) while the maximum is 3600 (1 hour) even if MFA is used.
For MFA authentication (using an IAM user or root), the minimum is 900 seconds (15 minutes), the maximum is 129600 (36 hours).
AWS Cognito Region
Specify the hosting region for AWS Cognito.
Default:
Available Values:
NORTHERNVIRGINIA, OHIO, NORTHERNVIRGINIA, NORTHERNCALIFORNIA, OREGON, CAPETOWN, HONGKONG, MUMBAI, OSAKA, SEOUL, SINGAPORE, SYDNEY, TOKYO, CENTRAL, BEIJING, NINGXIA, FRANKFURT, IRELAND, LONDON, MILAN, PARIS, STOCKHOLM, BAHRAIN, SAOPAULO, GOVCLOUDEAST, GOVCLOUDWEST
AWS User Pool Id
Specify the User Pool Id from AWS Cognito > Manage User Pools > select your user pool > General settings > Pool Id.
AWS User Pool Client App Id
Specify the User Pool Client App Id from AWS Cognito > Manage Identity Pools > select your user pool* > General settings > App clients > App client Id.
AWS User Pool Client App Secret
(Optional) Specify the User Pool Client App Secret from AWS Cognito > Manage Identity Pools > select your user pool > General settings > App clients > App client secret.
AWS Identity Pool Id
Specify the Identity Pool Id from AWS Cognito > Manage Identity Pools > select your identity pool > Edit identity pool > Identity Pool Id.
SSO¶
Note
The SSO authentication is not supported in this release.
Parameter
Description
User
Specify the IdP user name to authenticate the IdP (as set in the Auth Scheme) via SSO.
Password
Specify the password to authenticate the IdP (as set in the Auth Scheme) user via SSO.
SSO Login URL
Specify the identity provider’s (as set in the Auth Scheme) login URL.
SSO Properties
Specify the additional properties required to connect to the identity provider in a semicolon-separated list.
You can set and use OKTA, ADFS, or PingFederate in the Auth Scheme as identity provider for SSO.
ADFS example:
AuthScheme=ADFS; AWSRegion=Ireland; User=user@cdata.com; Password=CH8WerW121235647iCa6; SSOLoginURL=’https://adfs.domain.com’; AWSRoleArn=arn:aws:iam::1234:role/ADFS_SSO; AWSPrincipalArn=arn:aws:iam::1234:saml-provider/ADFSProvider; S3StagingDirectory=s3://athena/staging;
OKTA example:
AuthScheme=Okta; AWSRegion=Ireland; User=user@cdata.com; Password=CH8WerW121235647iCa6; SSOLoginURL=’https://cdata-us.okta.com/home/amazon_aws/0oa35m8arsAL5f5NrE6NdA356/272’; SSOProperties=’ApiToken=01230GGG2ceAnm_tPAf4MhiMELXZ0L0N1pAYrO1VR-hGQSf;’; AWSRoleArn=arn:aws:iam::1234:role/Okta_SSO; AWSPrincipalARN=arn:aws:iam::1234:saml-provider/OktaProvider; S3StagingDirectory=s3://athena/staging;
SSO Exchange Url
Specify the URL used for consuming the SAML response and exchanging it for service specific credentials.
SSL¶
Note
The SSL authentication is not supported in this release. However, you can specify the SSL certificate content for an SSL handshake if the cluster on DynamoDB is using SSL.
Parameter
Description
SSL Server Cert
Specify the TLS/SSL certificate to be accepted from the server.
Accepted Values:
A full PEM Certificate
A path to a local file containing the certificate
The public key
The MD5 Thumbprint (hex values can also be either space or colon separated)
The SHA1 Thumbprint (hex values can also be either space or colon separated)
If not specified, any certificate trusted by the machine is accepted.
Certificates are validated as trusted by the machine based on the system’s trust store. The trust store used is the ‘javax.net.ssl.trustStore’ value specified for the system.
If no value is specified for this property, Java’s default trust store is used
(for example,
JAVA_HOME\lib\security\cacerts).Use
*to signify to accept all certificates. This is not recommended due to security concerns.
Firewall¶
Parameter
Description
Firewall Type
Specify the protocol used by the proxy-based firewall for traffic tunneling.
Available Options:
NONE: Default.
TUNNEL: Opens a connection to DynamoDB and traffic flows back and forth through the proxy. The default port is 80.
SOCKS4: Sends data through the SOCKSv4 proxy as specified in Firewall Server and Firewall Port. The default port is 1080.
SOCKS5: Sends data through the SOCKSv5 proxy as specified in Firewall Server and Firewall Port. The default port is 1080.
Firewall Server
Specify the host name, DNS name, or IP address of the proxy-based firewall.
Firewall Port
Specify the TCP port of the proxy-based firewall.
Firewall User
Specify the user name to authenticate with the proxy-based firewall.
Firewall Password
Specify the password to authenticate with the proxy-based firewall.
Proxy¶
Parameter |
Description |
|---|---|
Proxy Auto Detect |
Select this to use the system proxy settings. Don’t select this if you’re using custom proxy settings. For SOCKS proxy, select the appropriate value in Firewall Type. |
Proxy Server |
Specify the hostname or IP address of a proxy to route HTTP traffic. For SOCKS proxy, select the appropriate value in Firewall Type. |
Proxy Port |
Specify the TCP port the ProxyServer proxy is running on. Default: 80 |
Proxy Auth Scheme |
Specify the authentication type to use to authenticate to the proxy server. Available Values:
|
Proxy User |
Specify the username to authenticate to the proxy server based on the chosen Proxy Auth Scheme. If you are using Windows or Kerberos authentication, set this property to a user name in one of the following formats:
|
Proxy Password |
Specify the password to authenticate to the proxy server based on the chosen Proxy Auth Scheme. |
Proxy SSL Type |
Select the SSL type when connecting to the proxy server. Available Values:
|
Proxy Exceptions |
Specify a semicolon separated list of destination hostnames or IPs that are exempt from connecting through the proxy server. |
Logging¶
Parameter
Description
Verbosity
Specify the verbosity level between 1 to 5 to include details in the log file.
Log Modules
Includes the core modules in the log files. Add module names separated by a semi-colon.
By default, all modules are included.
Max Log File Count
Specify the maximum file count for log files.
After the limit, the log file is rolled over and time is appended at the end of the file. The oldest log file is deleted.
Maximum Value: 2
Default: -1. A negative or zero value indicates unlimited files.
Schema¶
Parameter
Description
Browsable Tables
Specify the schemas as subset of the available schemas in a comma separated list. For example,
BrowsableSchemas=SchemaA,SchemaB,SchemaC.Tables
Specify the fully qualified name of the table as a subset of the available tables in a comma separated list. For example,
Tables=TableA,TableB,TableC.Each table must be a valid SQL identifier that might contain special characters escaped using square brackets, double-quotes, or backticks. For example,
Tables=TableA,[TableB/WithSlash],WithCatalog.WithSchema.`TableC With Space`.Views
Specify the fully qualified name of the Views as a subset of the available tables in a comma separated list. For example,
Views=ViewA,ViewB,ViewC.Each table must be a valid SQL identifier that might contain special characters escaped using square brackets, double-quotes, or backticks. For example,
Views=ViewA,[ViewB/WithSlash],WithCatalog.WithSchema.`ViewC With Space`.
Misc¶
Parameter |
Description |
|---|---|
Auto Detect Index |
Select this to automatically detect the secondary index based on the query used. |
Batch Size |
Specify the maximum size of each batch operation. Default: 0 |
Connection Life Time |
Specify the maximum limit for a connection to stay connected in seconds. Default: 0 indicates unlimited lifetime for a connection. |
Flatten Arrays |
Specify an arbitrary number to flatten the elements in a nested array into columns. By default, the nested arrays are returned as JSON strings. Set it to “-1” to flatten all the elements. |
Flatten Objects |
Select this to flatten the object properties in a nested array into columns. By default, the nested arrays are returned as JSON strings. |
Flexible Schema |
Set FlexibleSchema to true to scan for additional metadata on the query result set. Otherwise, the metadata will remain the same. |
Generate Schema Files |
Specify the preference when to generate and save the schemas. Available Values:
|
Ignore Types |
Specify to remove support for the specified types. For example: Time. These types will then be reported as strings instead. Default: Datetime,Date,Time |
Maximum Request Retries |
Specify the maximum number of times to retry a request. Default: 4 |
Max Rows |
Specify the limit for the number of rows returned if no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses. |
Other |
Specify the caching, integration, or formatting properties in a list format separated by a semicolon. Available Options:
|
Page size |
Specify the maximum number of results to return per page from Amazon DynamoDB. A higher value results in better performance but uses more memory. |
Pool Idle Timeout |
Specify the idle time for a connection in a pool. Default: 60 seconds |
Pool Max Size |
Specify the maximum number for connections in a pool. To disable, set the value to 0 or less. Default: 100 |
Pool Min Size |
Specify the minimum number for connections in a pool. Default: 1 |
Pool Wait Time |
Specify the maximum wait duration for a connection to become available. If a new connection request is in wait for an available connection but exceeds the time, an error is thrown. By default, new connection requests have a forever wait time for an available connection. Default: 60 seconds |
Pseudo Columns |
Specify the pseudo columns in the comma-separated list to be added as columns to the table. For example, Use the |
Read only |
Select this to enforce only SELECT queries to work on Amazon DynamoDB. |
Retry Wait Time |
Specify the minimum number of milliseconds the provider needs to wait to retry a request. Default: 2000 |
Row Scan Depth |
Specify the maximum number of rows to scan for the available columns in a table. Set it to |
Separator Character |
Specify the character or characters to denote hierarchy or separate columns. Default: Note If your data has columns that use a period |
Thread Count |
Specify the number of threads to use when selecting data via a parallel scan. To disable parallel scans, set this to |
Timeout |
Specify the time limit in seconds after which the operation is canceled and an error is thrown. A value of 0 specifies that the operation never times out until completion or failure. Default: 60 seconds |
Type Detection Scheme |
Specify how to scan data to determine the fields and datatypes in a document collection. Available Values:
|
Use Batch Write Item Operation |
Select this to handle UPDATE or INSERT queries when inserting, updating binary, or binary-set data. |
Use Connection Pooling |
Select this to enable connection pooling. |
Use Consistent Reads |
Select this to always use Consistent Reads when querying Amazon DynamoDB. |
User Defined Views |
Specify the file path pointing to the JSON configuration file that contains custom views. |
Use Simple Names |
Select this to determine if simple names should be used for tables and columns. |
Obfuscate Literals¶
Obfuscate Literals—Enable this toggle to hide actual values in the query statements that are ingested during query log ingestion or executed in Compose. This toggle is disabled by default.
Test Connection¶
Under Test Connection, click Test to validate network connectivity.
If the connection test fails, make sure the JDBC URI and service account credentials are correct.
Logging Configuration¶
Select the logging level for the connector logs and save the values by clicking Save in this section. The available log levels are based on the Log4j framework.
Parameter |
Description |
|---|---|
Log level |
Select the log level to generate logs. The available options are INFO, DEBUG, WARN, TRACE, ERROR, FATAL, ALL. |
Metadata Extraction¶
You can configure metadata extraction (MDE) for an OCF data source on the Metadata Extraction tab of the Settings page. Refer to Configure Metadata Extraction for OCF Data Sources for information about the available configuration options.
This connector supports default query-based MDE. Custom query-based extraction is not supported.
Compose¶
Not supported.
Sampling and Profiling¶
Sampling and profiling is supported. For details, see Configure Sampling and Profiling for OCF Data Sources.
Troubleshooting¶
Refer to Troubleshooting for information about logs.
General Troubleshooting Tips¶
Verify the Driver Version Being Used¶
The driver version being used can be obtained from the log file. It is printed out whenever a connection is opened and is in the form:
Open Snowflake connection. Version: 20.0.7514.0. Edition: [JDBC Driver].
The version will help identify if there have been any issues that have been resolved in later builds in which case the customer will need to be updated. Identifying the version also ensures that any testing performed in house is done using the same build.
Identify Whether the Issue Stems from Product or Application or the Driver¶
Reviewing the error message should help you identify the source of the problem (For example, an error message you are familiar with or know stems from your product). Viewing the stack trace for the exception will help identify whether it has the CData class in it. In this case, the error is most likely coming from the driver.
Another useful tip is to verify the query being pushed down to the driver. Depending on the issue, you can distinguish whether the problem is specific to the product or the driver.
Identify Whether the Issue Stems from the Driver or the Data Source¶
One of the best ways to determine this is to look at the debug log for the driver. The log will display the order of operations performed (such as retrieving metadata, executing queries, etc.) along with the requests and responses sent to the server. The error message will be displayed in the log as well and will help identify at what point, call, or request the error occurred.
The request and response sequence can be reviewed to identify if there are any issues. The request can be verified to ensure that the format and data is correct based on the query being issued. The request itself will vary between drivers, so reviewing the data source specifications may help identify issues. If any issues are identified, such as a malformed request, this should be escalated to the CData team to investigate further.
The response can also be reviewed as it may contain additional information on errors (one good example are the SharePoint drivers which may just return an HTTP response that needs to be looked at).
The response can also be reviewed for the data returned. This is useful for cases where customers see issues where data is not being returned when they expect it to. In these cases, the response can be reviewed to identify if the response from the server contains the data they expect. If it does not, then this means the data most likely doesn’t exist on the server or does not match for the query they entered.
If it does exist in the response, then it may be a filtering issue in the driver.
To troubleshoot this, you can try removing filters (e.g. WHERE clause) and identify if the data is returned.
If it is, then this narrows down the issue to the filter. If the filter is pushed down to the driver (e.g. there isn’t an extra layer performing the filter), an issue can be raised with the CData team to investigate further.
Try to reproduce the issue in a local environment¶
In many cases, it is helpful to try to reproduce a customer’s issue in your local testing environment. This helps run various testing procedures and narrow down the issue. If the issue can be reproduced, the appropriate action can be taken to get it resolved. If the issue cannot be reproduced, then the customer’s behavior may be a result of a configuration issue or a data specific problem. In these cases, it is helpful to compare log files from your local test environment to the customer’s. Connection properties can be compared to ensure that the correct settings are specified. Additionally, the request/response sequence can be compared to identify if there are any differences there. For issues that seem to be data specific, it is helpful to try to import their data set or configure the same data (where applicable) and run tests locally to further troubleshoot and narrow down the issue. Take notice when the log file shows that the customer has set the location property in the connection string. This may indicate that the customer is using a custom schema file (.RSD), and it is often important to retrieve this schema file from them in order to reproduce the issue locally.
SSL Troubleshooting Tips¶
SSL Handshake Errors¶
Example: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException:
Server not trusted by the user
This particular error occurs when the certificate presented by the server is not trusted by the user/machine. The driver will attempt to validate the server certificate using the system’s trust store.
The trust store will be either the javax.net.ssl.trustStore value (if specified) for the system or will map to java’s installed cacerts.
If a value is specified for the SSL Server Cert property, this value will override the system trust store and will attempt to validate the certificate for the specified input.
The format of the input must be in one of the forms specified in the CData help documentation.
SSL Client Properties¶
These properties are specific for client authentication, they are not for validating a normal SSL connection for encrypted communication. These properties are specific for 2-way SSL where the connection is encrypted but the server requires the client to authenticate. This particular logic is configured on the server and in such cases the server will request that the client present their certificate to validate their identity and authenticate with the server.
In most cases, these properties should never be set. If a customer has set these, it is best to verify with them that the server requires client authentication via PKI (public key infrastructure) and if not to just remove them.